How to maintain the case opener in winter?

Winter is coming. With the sharp drop of temperature, most objects become particularly sensitive in the cold weather in winter. In particular, the daily maintenance of various machines and equipment on the packaging production line in winter is crucial. As far as the unpacking machine equipment is concerned, once the temperature and other factors are abnormal, it will not only delay the reduction of enterprise productivity, but also bring many hazards to the enterprise. Today we will talk about how to maintain the unpacking machine in winter.

It is well known that the weather is dry in winter. As an operator, you should step on the accelerator at all times to prevent the mechanical equipment from corrosion and damage to the prefabricated parts and reduce the service life. In addition, due to the very low temperature, it is necessary to remove all kinds of hydraulic oil in the machine and equipment of the case opener on time.
Such as four column hydraulic press or hydraulic transmission oil, refined oil, automobile oil, grease, unpacking oil, etc. Avoid viscosity changes of various hydraulic oils caused by objective factors such as temperature reduction and fluidity reduction, and other factors such as normal operation of machinery and equipment. In addition, we should always keep the surfaces of machines and equipment clean. After each use, be sure to do a good job of cleaning to facilitate the next use.
How to maintain the case opener in winter?
For any open box machine, the starter is the core component, so the daily maintenance of the starter is particularly important. It is difficult to start the gas turbine in winter. The more starters there are, the more difficult it is to start. In such a vicious cycle, each prefabricated part should be kept clean and dry during starting, especially the motor carbon brush and the motor commutator should be further contacted. In addition, immediately check and adjust the electrolyte density of the case opener, pay attention to the thermal insulation of the rechargeable battery, and prevent the large capacity lithium battery from freezing and cracking due to the low electrolyte density.